Our Training CoursesQuality means doing the same thing better and better each day

   

Radiographic Testing (RT) Level-I Course


Training Course Objective :

To provide a basic knowledge of RT to enable a participant to carryout tests according to an established procedure under the supervision of a level II or level III personnel. The course is especially designed to provide a sound theoretical knowledge and practical skill for RT required for a Level I technician.

RT Level I Responsibilities :

To carryout operation as per written procedure/instruction from Level II personnel. He shall be able to set up the carryout the tests as per established and approved RT procedures, classify, report the results and to follow safety norms. He shall not be responsible for the choice of the test technique nor for assessment of the test results.

RT Level I Course outline :

  • Nuclear Physics-Interaction of Radiation with Matter
  • Shielding, Radiation Detectors, Biological Effects
  • Radiation Protection, Basic Rules & Techniques
  • Sources of Radiation and their characteristics
  • Film Radiography
  • Film Processing
  • Inspection Techniques and Procedures
  • Sensitivity & Definition, I.Q.Is, Other Accessories
  • Types of Discontinuities

RT Level I Practical Training :

Radiography of Castings and welds using X-ray and Gamma ray.

Radiographic Testing (RT) Level-II Course


Training Course Objective :

The course is intended to provide through grounding in the principle of Radiographic Testing-RT and fundamentals of material and process such that the trainee would be able to

  • Identify suitability of RT for the material and inspection technique
  • Develop techniques and procedures that can be followed by a Level I operator
  • Analyze the test result and document the same
  • Be familiar with codes, standards and specifications for RT to evaluate results of the tests
  • Be conversant with all statutory and safety norms of the authorities under jurisdiction

RT Level II Responsibilities :

A certified RT Level 2 personnel is qualified to :

  • Select proper test technique, equipment, films, IQI and other test parameters
  • Set up equipment
  • Perform testing, Manually process film for high contrast and resolution and interpret the results as per applicable standards
  • Have knowledge of the scope and limitations of RT
  • Be familiar with production processes of the test material and knowledge of type and location of expected defects
  • Describe the operational steps in the radiography test method and understand the importance of each step
  • To develop RT technique for testing a particular job
  • Prepare test report for i. Accept ii. Reject iii. Rework
  • Prepare written instruction for Level I
  • Guide and check test results of Level I operators
  • Responsible for care and maintenance of the NDT/RT equipment

RT Level II Course outline :

  • Review of Level-I course
  • Non-conventional Radiography
  • Techniques in radiography
  • Codes, standards and Procedures
  • Acceptance Standards
  • Manufacturing processes and discontinuities
  • Interpretation of Radiographs

RT Level II Practical Training :

Same as level-I + Interpretation, evaluation of Radiographs, recording of test results and preparation of test reports.


Training Courses


This institute is an industry oriented training centre which recognizes the importance of the well trained manpower in effective implementation of appropriate Non-Destructive Testing techniques. This institute caters to the training requirements of engineers, supervisors and NDT operators.

Quality NDT Services conduct BARC level-I course for radiographer at our institute. Examination is conducted by BARC and certification is provided by the same.We also provide Level-I and Level-II certification in RT, UT, PT and MT as per SNT-TC-1A/EN473.

The faculty consists of well-qualified and experienced personnel [ASNT Level-III, Radiological Safety Officer, BARC Scientific officers].

Faculty

The Institute has an air conditioned lecture hall having a seating capacity of 25 candidates. With audio-visual displays and fully fledged training workshop for popular methods of Non-Destructive Testing. NDT laboratory for methods RT, UT, MT, PT & VT.

Well equipped dark room with manual processing system.Under ground radiography enclosure approved by AERB.Sufficient equipment for RT, UT, PT & MT.

  • RT - GAMM RAY CAMERAS - AMERTEST-660, SPEC-2T, ROLI-1, ROLI-3 and X-ray machines
  • UT - Equipment of different makes – EEC, Modsonic, also Digital Thickness meters.
  • MPT - Installed machine upto 1000A and portables units with prods, yokes etc. Various test samples with simulated defects A library equipped relevant books, codes of reference specs etc.
   

BARC RT Level-I Course


Quality NDT Services conduct courses on Industrial Radiography Testing & Safety Level-1,( RT- 1) at Quality NDT Training Institute, Bhosari, Pune. Our institute is an approved Training Centre by Radiological Physics & Advisory Division, Bhabha Atomic Research Centre, Mumbai /AERB.

The details of the course are as follows:-

Total seats available for the course are 25 Nos.

  Course duration   1) 18 Feb to 8 March, 2013
2) 8-26 April, 2013
3) 3-21 June, 2013
4) 22 July -09 August, 2013
5) 16 Sept -04 Oct, 2013
6)16 Dec 2013 - 3 Jan 2014
  Venue   Quality NDT Training Institute,
Plot No. B.G.A -1/4, Bhosari General Block,
M.I.D.C., Bhosari, Pune - 411026.
  Minimum Qualification   12th Std pass in Science & 10th with Math OR
Degree / Diploma in Engineering or Graduate in
Science (Physics/ Math).
  Minimum Experience & Proof    Trainee Radiographer Approval Letter from AERB [Min - 6 Months]
Experience will be based on the date of AERBTrainee approval letter.
  Fees   Rs. 17,500/- + 12.36% Service Tax (Inclusive of Lunch, Snacks & Tea) Payment to be made by Demand Draft in favor of “Quality NDT Training Institute”, Pune.
  Contact Address   Company Address
  Last Date   Application form (attached herewith) duly filled in along with fees should reach to the Course Director 15 days before starting date of the course.
  Accommodation   Accommodation facilities(with breakfast & Dinner only – Strictly Vegetarian) will be available by Institute for limited number of 20 candidates on “First come First Serve basis” @ Rs. 11500/- per candidate. Candidate who would like to avail of this facility should write to us separately with 100% advance payment by Demand Draft in favor of “Sayali Enterprises”, Pune.


The Certificate will be issued by Bhabha Atomic Research Centre, Mumbai.

   

Ultrasonic Testing (UT) Level-I Course


Training Course Objective :

To provide a basic knowledge of UT to enable a participant to carryout tests according to an established procedure under the supervision of a level II or level III personnel. The course is especially designed to provide a sound theoretical knowledge and practical skill for UT required for a Level I (1) technician

UT Level I Responsibilities :

To carryout operation as per written procedure/instruction from Level II personnel. He shall be able to set up the equipment, calibrate and carryout the tests, classify and report the results. He shall not be responsible for the choice of the test technique nor for assessment of the test results.

UT Level I Course outline :

  • Properties of Sound Waves
  • Generation of Ultrasonic waves
  • Interaction of ultrasound with matter and boundaries
  • Types of Probes
  • Test Methods
  • Test Equipment
  • Instrumentation
  • Test Variables
  • Inspection procedures
  • Types of Discontinuities

UT Level I Practical Training :

The course is intended to provide through grounding in the principle of Ultrasonic Testing-UT and fundamentals of material and process such that the trainee would be able to .

Ultrasonic Testing (UT) Level-II Course


Training Course Objective :

The course is intended to provide through grounding in the principle of Ultrasonic Testing-UT and fundamentals of material and process such that the trainee would be able to

  • Identify suitability of UT for the material and inspection technique
  • Develop techniques and procedures that can be followed by a Level I operator
  • Analyse the test result and document the same
  • Be familiar with codes, standards and specifications for RT to evaluate results of the tests

UT Level II Responsibilities :

A certified UT Level II personnel is qualified to :

  • Select proper test technique, equipment and probes
  • Set up and calibrate the equipment
  • Perform testing and interpret the results as per applicable standards
  • Have knowledge of the scope and limitations of UT
  • Be familiar with production processes of the test material and knowledge of type and location of expected defects
  • To develop UT technique for testing a particular job
  • Prepare test report for i. Accept ii. Reject iii. Rework
  • Prepare written instruction for Level I
  • Guide and check test results of Level I operators
  • Responsible for care and maintenance of the NDT/UT equipment

UT Level II Course outline :

  • Review of Level-I course
  • In-depth study of test Variables
  • Immersion Techniques
  • Principles of DGS/DAC Methods
  • Echo dynamics for Reflector Evaluation
  • Manufacturing processes and discontinuities
  • Codes, standards and Procedures
  • Acceptance Standards
  • Evaluation of Test Equipment

UT Level II Practical Training :

Same as for Level 1 course + Interpretation, Evaluation of Indications using DGS/DAC. Evaluation Methods and Echo Dynamics, Beam Profile and Plotting.

   

Magnetic Particle Testing (MPT) Level-I Course


Training Course Objective :

To provide a basic Knowledge of MT to enable a participant to carry out tests according to a established procedure under supervision of a level II or III personnel. The course is especially designed to provide a sound theoretical knowledge and practical skill for MT required for a level I technician.

MT Level I Responsibilities :

To carry out operations as per written procedure/instruction from level II personnel. He shall be able to set up equipment, calibrate and carry out tests, classify and report the results. He shall not be responsible for the choice of test technique nor for assessment of the test results.

MT Level I Course outline :

  • Basic of Magnetism
  • Magnetisation Techniques
  • Inspection Mediums
  • Inspection Techniques
  • Indication Classification
  • Test Equipments and Accessories
  • Demagnetisation
  • Types of Discontinuities

MT Level I Practical Training :

Yokes, Prods, Headshot, Central Conductor, Coil Techniques, Using dry, wet ordinary and wet fluorescent powders, Demagnetisation.

Magnetic Particle Testing (MPT) Level-II Course


Training Course Objective :

The course is intended to provide detailed instruction in theory and practice such that the personnel shall be able to

  • Identify suitability of MT for material and inspection procedure
  • Develop techniques and procedures that can be followed by a Level I operator
  • Analyse the test result and document the same

MT Level II Responsibilities :

A certified MT Level II personnel is qualified to :

  • To select proper test technique and equipment as per established procedure
  • To calibrate, set and carry out test or supervise testing by level I operator
  • Prepare test report for acceptance/rejection as per standard
  • Have knowledge of merits and limitations of MT and other common NDT methods
  • Prepare written procedure for level I operator
  • Responsible for care and maintenance of testing machines and accessories

MT Level II Course outline :

  • Review of Level-I course
  • Selection of Techniques
  • Codes, standards and Procedures
  • Acceptance Standards
  • Interpretation of Indications
  • Preservation of Indications
  • Manufacturing processes and discontinuities

MT Level II Practical Training :

Same as Level-I + Interpretation, evaluation and recording of test results.

   

Liquid (Dye) Penetrant Testing (DPT/PT) Level-I Course


Training Course Objective :

To provide basic knowledge of PT sufficient to enable a person to carry out tests in accordance with established procedures under the supervision of level II personnel.

PT Level I Responsibilities :

To carry out operations according to written instructions, set up the equipment, carry out the test, record, classify, and report the results. The level I personnel shell be not responsible for choice of test method nor for assessment of test results.

PT Level I Course outline :

  • Basics of Penetrant Testing
  • Penetrant Groups
  • Pre-cleaning Methods
  • Penetrant testing methods and techniques
  • Types of Developers
  • Inspection Procedures
  • Sensitivity & Resolution checking of test systems
  • Types of Discontinuities

PT Level I Practical Training :

Visible (Red) and Fluorescent Penetrants of various types of different surfaces use of dry, wet, solvent suspended developers.

Liquid (Dye) Penetrant Testing (LPT) Level-II Course


Training Course Objective :

To provide the personnel with full theoretical and practical knowledge of PT process and related standards.


PT Level II Responsibilities :

To perform and direct PT according to the established or recognized procedures, select test methods to be used, set up and calibrate equipment, interpret and evaluate result according to applicable standards. Develop PT techniques adopted to problems arising during testing, prepare written instructions, organize and report test results.

PT Level II Course Outline:

  • To select proper test technique and equipment as per established procedure
  • To calibrate, set and carry out test or supervise testing by level I operator
  • Prepare test report for acceptance/rejection as per standard
  • Have knowledge of merits and limitations of MT and other common NDT methods
  • Prepare written procedure for level I operator
  • Responsible for care and maintenance of testing machines and accessories

MT Level II Course outline :

  • Review of Level-I course
  • Selection of Techniques
  • Codes, standards and Procedures
  • Acceptance Standards
  • Interpretation of Indications
  • Preservation of Indications
  • Manufacturing processes and discontinuities

PT Level II Practical Training :

Same as Level-I + Interpretation, evaluation and recording of test results.

Quality means doing the same thing better and better each day !